Cne6923 software update
1. Insert SD Card to navi card slot. Make sure the unit is turn off.
2. Turn on the unit and you will see this on the screen. Follow the instruction, “(1)Press
here to update”.
Update will start immediately.
After all updates are done, the unit will automatically turn off.
7. The unit will then ask you to calibrate the touchscreen. Follow what is written on the
“(1)Carefully press and briefly hold stylus on the center of the target(2). Repeat as the
target moves around the screen.” (Just press and follow the target.)
the unit and remove the sd card.
After removing the sd card, turn on the unit. The update is already done.