Technical Service Bulletin. Hyundai

1.

Model
All Models
Group
PW main
Number
-
SUBJECT :
Date
22.12.2022
Education regarding – To Replace Power Window main micro
Switch from PCB and to re assemble in door trimmer
Area
INDIA
Technical Service
Bulletin
DESCRIPTION
This is regarding only Power Window micro switch Replacement for After Sales Vehicle
Claim instead of Power window main.
Rework Procedure:
SQ.
PHOTO
CONTENTS
1
Remove Door Trim As Usual in
Manual
2
After Remove Door Trim, Take
Out the PW Main
3
Remove window lock button from
the main by using hand itself
pulling up, no tool needed
4
8 locking points
Take Out Back cover with help of
small flat screw driver from lock
Area as shown in Picture

2.

SQ.
PHOTO
CONTENTS
After removing the back cover, PCB
5
can be taken out easily and also
remove the rubber pad
Remove with pressure
Soldering tip
To remove the defect micro switch,
6
de-solder has to be done
7
After de solder, solder again with the
new micros witch
8
The defect PCB is now repaired
9
The PCB is now assembled with
rubber pad and back cover and full
assembly is done.

3.

SQ.
PHOTO
CONTENTS
10
Assemble the window lock button
11
After assembling the window lock
button , insert and lock the PW main
In pull handle
12
Assemble the pull handle in door trim