22.26M
Category: industryindustry

FFI Future FastInterceptor

1.

FFI
FutureFastInterceptor

2.

Requirements summarized
(NOTE: not always clear, specs as written by MOD)
• LOA: between 11.5meter and 13meter
• Beam: deflated 2730mm, beam with inflated collar: TBD
• Weight „light-ship“: 7200kg
• Weight „full-payload“: 9000kg
• Speed: minimum 47 knots, (50+ desired)
• Range: 240NM@25kn@SS3
Please check docs in same folder

3.

Links to main specs in seperate PDF:
See Speeds and their ideas of running it through their CFD here
See their ideas of performanceAndDimensions here
See Class and general discription here

4.

Not clear yet, needs decision on interpretation:
Tender:
The CRAFT should have a maximum full loaded weight of 9.000kg [including payload
fuel, 2 pax and weapons].
Michael:
Could imagine that they refer on max. payload of their cranes, 9000kg
Why are talking about 2pax only otherwise
What is max payload plus full crew?
Tender
The payload should not exceed 2600kg.
The maximum light ship should not exceed the 7200kg.
Michael:
We should consider any information given in regards to payload/equipment and calculate
Reverse – since 8 to 12 pax are mentioned we need to get the load scenarios clear
Please check docs in same folder

5.

Michael:
In „Annex 5 - Protocol Panship Simulation“ we can find the weights
that they like to use for their simulation,
So 1607,5kg with 8pax
But up to 12 pax should
be !
So 2200kg with optional
12pax plus backpacks,

6.

Aft-deck for inflatable/scooter/jet-Ski
Combined d-shape
with classic collar-shape
in front to gain space
for engine-bay
( for optional bigger engines or
triple installation ) and
3 by 3 seat arrangement
on center deck
Low-profile forward console to place hook
Move e-equipment to second console and in center/middle tunnel
deck: 8pax easy, more seats as option in main-deck plus aft-deck
Console 2 plus 1
Aft plattform to be used as slpash-wall
when sailing in follwing seas
Maybe weapons in aft give better coverage
Center-ws/ towing-pole can be detachable to
Give space for gear
Antenna positions TBD
Hooks should have a distance of 6400mm
(could be more but the question is how to deal
with the placement vs. LCG

7.

D-shape
Tube/collar classic shape, round, tapered, flat at nose
Example:

8.

Deadrise increase outboard panel
Same hull used for z-drives

9.

Flat keel

10.

11.

Flange under collar
English     Русский Rules