6.39M

Categories:

economics

medicine

The presence of ventilators in the world, according to statistics, at the time of the pandemic

1.

The availability of ventilators in Russia, according to statistics, by the time the pandemic
began, was 27 complexes per 100 thousand people. A similar indicator in the United States is 30%
lower, and Italy experienced an acute shortage of such equipment (Fig. 4).
Fig. 4. Availability of ventilators in the countries of the world, pcs. per 100 thousand people
Источник: данные Минпромторга России (данные на январь – апрель 2020 года)

2.

According to the calculations of DISCOVERY Research Group analysts, the volume of the ventilator
market in Russia in 2018 amounted to 3,995 units. In 2019, in physical terms, it increased by 37.3%,
amounting to 5487 units, and in 2020, due to the pandemic, by 112%, or 11680 units (Fig. 5).
Рис. 5. Динамика рынка ИВЛ в России в 2015-2020 гг., шт.
Источник: данные Discovery Research Group

3.

The main volume of supplies falls on the Aventa-M device.
The share in the procurement of Aventa-M from UPZ in 2019 was 6.9%, or 286 units for 450 million
rubles. Other devices from UPZ - "Vela", "Phase", "Potok" and others - occupied another 1,6%, or 66 pieces
for 70 million rubles.
The Russian company Triton-Electronics also had a significant share (4.5%, 187 units for 270 million).
In 2019, most ventilators (in physical terms) were exported from Russia
АО УПЗ – 70%,
ООО Тритон-ЭлектроникС – 8,6 % и
ООО ТМТ -7,6 %.
In the second half of 2019 and the first half of 2020, UPZ produced 372 ventilators with a total value
of about 537.2 billion rubles.

4.

The main suppliers of imported components for ventilators at the UPZ are China (58%)
and Germany (22%) (Fig. 9).
Рис. 9. Основные зарубежные поставщики комплектующих аппаратов ИВЛ на
УПЗ (первое полугодие 2020 года), %
Источник: данные http://upz.ru
At the same time, according to Forbes and RAVEN experts, only 40% of ventilator
components purchased in China are Chinese-made products, the remaining 60% are
products manufactured in the United States and European countries purchased in China.

5.

• АО "УПЗ", Россия, 624000, Свердловская область, Сысертский
район, 25 км Челябинского тракта
Фаза-21, Фаза 21Р, Авента-У (РЗН 2019/8536,
МИ232870) , Авента-М (ФСР 2010/09268,
МИ232890), Поток, Вела,
• Уральский Оптико-Механический Завод (УОМЗ) 620100,
Россия, Свердловская область, г. Екатеринбург, ул. Восточная,
д. 33, корп. Б
SLE 6000 (РЗН 2021/1417, МИ232880),
ТЕВЛАР
• ООО АКСИМА компания, Москва
Flight 50, 60 с принадлежностями (ФСЗ
2012/12774, МИ232870)
• ООО "БРМ", Россия, 127550, Москва, ул. Тимирязевская, д. 1,
стр. 2
Беллависта 950 (РЗН 2014/1931) Беллависта
950е (РЗН 2021/13644, МИ232870)
• ООО фирма "Тритон-ЭлектроникС", Россия, 620133,
Свердловская область, г. Екатеринбург, ул. Бажова, д. 33
Zisline MV350, MV300, MV200 (РЗН
2015/2814, МИ232870)
• ООО "Респект-плюс", Россия, 238520, Калининградская
область, Балтийск, ул. Подгорная, д. 39
ВИАН-3 турбо (ФСР 2011/12018
• ООО Концерн "Аксион", Россия, 426000, Удмуртская
Республика, г. Ижевск, ул. Максима Горького, д. 90
АДТ-01 (РЗН 2021/14016, МИ318710)

6.

Уральский Оптико-Механический Завод (УОМЗ)
Авента-Вита
The ventilator "Aventa-Vita" is able to operate autonomously from external power
sources and stationary oxygen supply lines. It can be used outside of medical
institutions, including for children.
By the end of October 2021, the Aventa-Vita ventilator is undergoing final
technical tests (it will probably remain as a prototype)
НПЗ, Новосибирский приборостроительный завод
СИПАП-01
A temporary RZN reactor plant No. 2020/13159 was obtained until 2022 for the
sale of 100 devices under the MEDEV brand.
ООО КОНЦЕРН АКСИОН
СИПАП аппарат АДТ-01
РУ РЗН № 2021/14016

7.

Уральский Оптико-Механический Завод (УОМЗ)
АИВЛ-Д
Due to its low weight (4 kg), size and the ability to work offline, the device is suitable for use in
hospitals of medical institutions, as well as at home and on a walk. The functionality of the device
in standalone mode is provided by a built-in battery for three hours without recharging. AIVL-D is
equipped with a moisture and dust-resistant housing. The parameters of the device can be
adjusted for respiratory support for both adults and children. AIVL-D is equipped with pulse
oximetry and body temperature sensors. The device can be installed vertically and horizontally,
while the built-in rotation sensor will expand the screen to a convenient position for the user.
It is planned to register with Roszdravnadzor in 2024.
АИВЛ-01
Mechanical ventilation with the function of comprehensive monitoring of lung dynamics without
radiation. It allows you to visualize the filling of the lungs during breathing, assess the degree of
their damage - including in viral pneumonia, as well as in the case when doctors need to adjust
the strategy of respiratory support by adjusting the volumes of the respiratory mixture supplied
to the patient. Tomography is performed by a safe for humans electrical impedance method,
which is based on recording the level of electrical conductivity of human internal organs. It is
planned to produce both ventilators with a built-in tomograph and a tomograph as an
independent product.
In development.

8.

Уральский Оптико-Механический Завод (УОМЗ)
SLE 6000
It is designed to replace and support breathing in children and newborns, including those
with extremely low body weight, in intensive care units. It differs from analogues in a
function that excludes air retention in the lungs, and the ability to automatically control
saturation in a given range.
Registered with Roszdravnadzor RZN 2021/14170.
ТЕВЛАР
Automatic maintenance of the temperature and humidity parameters of the breathing
mixture at the outlet of the supply hose (in the patient) in a wide range of minute
ventilation;
- Autonomous channels for regulating the temperature and moisture content of the
breathing mixture;
- -Indication of the set and measured temperature at the outlet of the supply hose;
- - The presence of a spiral air duct made of porous metal in the evaporation chamber
(tank) reduces the degree of water heating (no more than 65 ° C);
- - The presence of an alarm about overheating of the breathing mixture and
malfunctions;
РЗН 2015/2620

9.

УПЗ-КРЭТ Авента-М
Berner Ross Medical
Bellavista 950
Респект-Плюс
ВИАН-3 турбо
Лидкор Leadvent
1 980 000 –
2 800 000
1 230 000
3 250 000
УПЗ-КРЭТ Авента
Тритон Zisline MV350
Тритон Zisline MV300
ООО АКСИМА Flight 60
РЗН 2015/2814
3 850 000
2 510 000
2 890 000

10.

SOP-3920-M061
Now we have SOP-3920-M090
the documents to work onVentilation
the "right
side" of the
control board PCBA
Welding map:
line work for switch and valve parts
component assembly
assembly
SOP-3910-M050
SOP-3920-M034
SIP-3920-S001-1.0
M9 complete machine tuning
work
Expiratory valve main body assembly
M9 Mainframe unit right panel assembly
instructions.docx
SOP-3920-M033
SOP-3920-M032
SOP-3910-M002-1.0
M9
upper
unit
parts
work
instructions.docx
*M9 Purge air volume assembly
*M9 Safety valve component assembly
SOP-3920-M001-1.0 M9 Mainframe unit workSOP-3920-M031
instructions.docx
SOP-3920-M035
SOP-3920-M003-1.0
M9 lower unit parts work
instructions.docx
*M9 Inspiratory
holding
M9 Pipe manufacturing
SOP-3910-M002
G9 upper unit parts
assembly
SOP-3920-M003
M9 lower unit parts
assembly
Reworking
SOP-3920-M005
component assembly
*High flow proportional valve
assembly
M9 high-pressure oxygen gas source
assembly
M9 software burn-in and
configuration
M9 whole machine
tuning and self-test
*M9 Air branch flow sensor
SOP-3920-M010
Reworking
SIP-3920-S001
Это позволяет
работать только по одной модели
М9 (Симфония)
SOP-3920-M013
SOP-3920-M030
SOP-3910-M014
SOP-3920-M004
Reworking
valve component assembly
* M9 hyperbaric oxygen stabilization
component work instructions
SOP-3920-M001
M9 Mainframe unit work
assembly
M9 Indoor temperature aging
SIP-3920-F001
Reworking
*Complete
machine
safety and
FQC
inspections
SOP-3920-M012
*M9 blower box component assembly
SOP-3920-M062
M9 -AC-DC power supply
components
SOP-3920-M006
Inventory
M9 product packaging
SOP-3910-M063
Remarks
Reworking
M9 Battery box components assembly
1、 1.With * is the key process, diamond box for QC inspection process
2、The process on the gray background needs to be tested.
OQC final inspection for
label and packaging integrity

11.

The files in the ‘right columns’ Файлы в «правых столбцах»
MINGHUA:
In the ‘right columns’, we currently provide you four files which we think
are important and relevant to the process that you can execute.
Please review these files in the folder ‘Files in the ‘right columns’’
В «правых столбцах» мы в настоящее время предоставляем вам
четыре файла, которые, по нашему мнению, важны и имеют
отношение к процессу, который вы можете выполнить. Пожалуйста,
просмотрите эти файлы в папке «Файлы в «правильных столбцах»
Please evaluate the feasibility of the process according
to the files we provide. Since you already have our M9
device in your lab, we suggest you to do some maneuver
with it. After the evaluation is done, please give us your
feedback.
Пожалуйста, оцените осуществимость процесса в
соответствии с предоставленными нами файлами.
Поскольку у вас уже есть наше устройство M9 в
вашей лаборатории, мы предлагаем вам немного
поманеврировать с ним. После того, как оценка будет
завершена, пожалуйста, дайте нам свой отзыв.

12.

The inclusion of the same type of devices from different manufacturers in the reactor plant will also require appropriate
testing and documentation.
1.
2.
RESOLUTION No. 878 of July 10, 2019
ON MEASURES TO STIMULATE THE PRODUCTION OF RADIO-ELECTRONIC PRODUCTS IN THE TERRITORY OF THE RUSSIAN FEDERATION IN THE
IMPLEMENTATION OF PURCHASES OF GOODS, WORKS, SERVICES FOR STATE AND MUNICIPAL NEEDS, ON AMENDMENTS TO THE ORDER OF THE
GOVERNMENT OF THE RUSSIAN FEDERATION OF SEPTEMBER 16, 2016 N 925 AND THE RECOGNITION OF SOME ACTS OF THE GOVERNMENT OF THE
RUSSIAN FEDERATION AS INVALID
3. Draft resolution on the assessment of the degree of localization of mechanical ventilation according to the point
system
So,
1. Having formed the TU for the three main nodes of the Symphony, we will be able to register only it.
Inclusions of the "either-or" type will be other devices
2. If we talk about the line, you need to delve into smaller blocks (turbine, valves, etc.) and clarify the
possibility of their at least identity in technological terms.
3. There are high-class or middle-class ventilators on the Russian market.
4. UOMZ plans to bring out transport and home ventilation (such as NPB560, Valve LS, Trilogy). This may
correspond to M3
5. It is necessary to discuss with Regboard how to plan the "phasing" taking into account the availability and
prospects

13.

• Prototyping of electronic products "turnkey"
• The quality of the product and the speed of
manufacture come out in the first place at the
design stage. Currently, the entire team of
NANOTECH Ltd. specialists is ready for the most
to implement these projects as efficiently as
possible. One of the three automatic assembly
lines has been adapted by the company’s
technologists exactly for the production of single
products, as well as for the implementation of
small-scale assembly

14.

15.

• Serial production of electronic products
"turnkey"
• When manufacturing serial products for our
partners, we feel obliged to ensure the timely
delivery of electronic modules with a 100%
quality guarantee. All divisions of the company
are successfully implement these projects by
increasing the manufacturability of the product
and selecting the most beneficial options for the
delivery of printed circuit boards and
components

16.

• Electronic manufacturing
complexity
services
of
any
• Our partners develop products without any limitations in
the selection of the element base. NANOTECH Ltd.
assembly facility is equipped with the most modern
equipment.
• – Component mounting accuracy of ±0.035 mm Cpk≥or 1.0
(3 sigma)
• – Size of mounted components from 01005 (0.3×0.15 mm)
to 45x100x15 mm
• – The ability to mount fine-pitch components (lead pitch
from 0.3 mm)
• – The ability to mount BGA, Flip-Cip etc.

17.

• Unique 14-step quality control system for all
stages of the manufacturing cycle
• We handle pre-production preparations. We
analyze the entire control design documentation
package and give recommendations to improve
the product manufacturability. The quality of the
product is ensured by a multi-level control
system at each stage of the manufacturing cycle.
The manufactured product is fully consistent
with the terms of reference and standards of the
International
Association
of
Electronics
Manufacturers (IPC)

18.

• Compliance of the quality management system
with the requirements of ISO 9001:2015
• We focus on the effective performance of tasks
and conditions improvement of our services. The
involvement of an independent organization
allows us to evaluate our management system,
which helps us to improve and be a reliable
supplier

19.

• Cooperation with the world's leading
manufacturer of solder assembly materials AIM
Solder
• AIM Solder (Montreal, Canada) is a manufacturer
of a wide range of solder materials and winner
the owner of many prestigious SMT industry
awards. AIM Solder also provides customers with
excellent technical support, service and training.
• Currently, the agreement between Nanotech and
AIM Solder ensures that all our customers also
have access to the benefits of using high quality
solder materials

20.

Engineering Center of Samara State Medical University
https://technopark-pro.ru/
A full range of
services for
the
development
and launch of
high-tech
medical
devices on the
market

21.

Engineering Center of Samara State Medical University
https://technopark-pro.ru/
3D printing
A new industrial-grade
model designed
specifically for smallscale production. A 3D
printer that is equipped
with a double extruder,
with a large print
volume and wireless
connectivity
Raise 3D pro2
Raised Pro2 Plus
Raise 3D E2
Witbox 2

22.

Engineering Center of Samara State Medical University
https://technopark-pro.ru/
Injection molding machines
Automated vacuum
plastic injection molding
equipment suitable for
the production of
prototypes and small
series of medium-sized
products
V 1000 A от KLM

23.

Engineering Center of Samara State Medical University
https://technopark-pro.ru/
Laser cutting, engraving
The laser engraving
machine can work with
a wide variety of
materials: plywood,
wood, plastic,
cardboard, glass, metal,
stone, textiles, rubber,
acrylic, ceramics and
many others
iber engraving machine ER 2006H

The presence of ventilators in the world, according to statistics, at the time of the pandemic

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.